|
Flush Face 39" x 22" Sight-Tight Fireplace with Screened Opening and Integral Grate.
TEMCO flush face fireplaces have a non-louvered front face design which allows finishing up to the opening (or up to the air inlet below the hearth in 42" models) for an all masonry look. Gasket sealed construction minimizes air infiltration. Use 8" double wall chimney. Will not accept a blower. Approved for use with TEMCO vent-free gas logs only.
For great value in wood-burning fireplaces, you can't do better than TEMCO's TFC39-22. With 39" x 22" openings and a full 19" hearth depth, these units have the look of costly 42" models but are priced substantially lower. If you need a flush face fireplace you can finish right up to the opening for a site-built masonry look. TEMCO's 39-22's are your best choice!
Features
- · TFC39-22 has a flush face free of air passages which permits finishing up to the opening with any noncombustible material for an all-masonry look.
- · Rigid, durable construction and full nailing flanges facilitate plumb, level installation.
- · 39" x 22" opening with 19" deep hearth. Zero-clearance to floor for easy installation.
- · Durable, firebrick-embossed refractory panels fully line back, sides, and hearth.
- · The wide brick-to-brick opening offers a full view of the fire. The 22" opening height creates attractive proportions.
- · Large, sturdy integral log grates allow full use of the generous hearth area.
- · This model uses TEMCO's double-wall chimney components with die-formed ends that snap-lock together quickly and easily without tools. With 12" outside diameter, 8" diameter flue, and 1" clearance to combustibles, these components install between standard 16" framing without cutting.
- · Chimney specifications provide great installation flexibility:
- · Up to four elbows (two sets of elbows) per system
- · Minimum system height: 12 1/2 feet. Maximum system height: 60 feet.
- · 13 1/2 feet minimum height with one set of elbows. 21 feet minimum height with two sets of elbows.
|
